Adelaide Loungewear Set - PDF Pattern A4 - Size 34-58

How much fabric do you need:
Pants: 140 x 265 cm
Top: 140 x 200 cm

If you sew both top and pants from the same fabric, you will need less overall, as the pattern pieces can be joined together when cutting. We do not have a measure for this.

Accessories:
– Elastic for waistband (5 cm wide, length adjusted to your waist)
– Thread that matches the fabric

Equipment:
– Overlock machine. Or sewing machine with stretch stitch or zigzag
– Scissors / rolling knife
– Ironing board and iron
– Clips or pins. Clips are safer when sewing with an overlock machine.

This digital product contains:

• Pdf pattern with sizes 34-58
• Vision level: Beginner
• Step-by-step instructions in pdf
• The pattern has a 0.7 cm seam allowance.
• List of everything you need
• Measurement chart of personal measurements and EU sizes
• Measurement chart showing the finished measurements of the garment
• Norwegian and English
• Video tutorial can be found in Systerhood

Download and print:

• Download the file you receive to your PC/computer.

• Print out the pattern in A4

• For best results, print only from a computer, not your mobile phone.

• Print at 100% scaling. Or make sure to print without changing the size of the file, using your printer's settings.

• Print the first page with the test square first! Measure it to be 2 inches (5.08 cm) on all sides. If the measurements are not correct, print again with different print settings until it measures 2 inches (5.08 cm).

• Then print all the sheets with this setting.

Assemble the pattern sheets:

• Each sheet is numbered.
• All sheets have a frame around which you must cut. A cliff line.
• These lines should be placed on top of each other.
• Cut only the left cut line and the top or bottom cut line. This will allow you to easily place all the patterns together.
• Use tape to attach them together.

Return and cancellation rights:

Once a digital product purchase has been completed, we do not offer the option to cancel or return the product. This is due to the nature of digital products, as they cannot be returned in the same way as physical goods. We therefore encourage our customers to be sure of their choice before completing their purchase.

Important information:

By purchasing and downloading our digital patterns, you accept the following terms:

• The products are protected by copyright and are for personal use only.
• It is strictly forbidden to resell, distribute or share the patterns with others.
• We do not accept responsibility for any loss or damage to the patterns after they have been downloaded.
• We encourage you to carefully store your digital patterns in a safe place for future use.

The top is sewn in stretch fabric of approximately 200 gsm.
The trousers are sewn in stretch fabric of approximately 200–300 gsm.

We recommend qualities such as jersey, pointelle, interlock, rib, punta di roma or similar fabrics with good elasticity and weight.

We especially recommend the top in thinner stretch fabric with good and soft elasticity, such as pointelle and thin jersey. This gives a lighter and more feminine look, and emphasizes the fall of the sleeves. This fabric is recommended because the top sits somewhat tight over the bust to emphasize it.

The pants can be sewn in the same fabric as the top for a soft set, or in a firmer stretch fabric with good hold and elasticity. Here, qualities of approx. 200–300 gsm work very well. For example. Punto de Roma.

All cast-ons are finished with a rolled hem on the overlock machine. Turtlenecks are also sewn with a rolled hem.